It was a concern, to hand over our small families-AG in responsible hands. Now we are convinced that we were able to achieve even this target thanks to their help.” Planned currently wait more capacity for the Eastern Switzerland especially homeowners who want to equip your House with an environmentally friendly geothermal heat-pump, usually several months on the necessary Earth probe hole. Therefore the new owner plans to expand the existing offer of in the coming years Alpine drilling AG. The entrepreneur wants to respond to the high demand for Earth probe holes with the expansion of capacity and an increase in the number of employees. Rolf Walti looks ready for this challenge: to take the step towards independence, certainly requires Courage of portion of. As partners are needed however, that accompany the life cycle of a company.” Courage, willingness to take risks and faith were the drive springs of each entrepreneurship what Yes again to make the engine of any economy.

St. near in particular the cantons of this gall, the extra capacity to benefit future Zurich and Graubunden. Burn increasingly important future that WINS use of geothermal energy. In this promising industry the Alpine Bohr AG next to the Earth probe holes offers all directly related services: from planning and advice on obtaining the drilling permit, the construction site installation, fixing the hole and filling the Earth probe, up to the disposal of sewage sludge. Geothermal energy counts as a real alternative to fossil fuels and is one of the most environmentally friendly ways to heat the home or entire factories and provide them with warm water. Geothermal heat pumps-heating use roughly 75 percent of the domestic environment energy and reduce CO2 emissions alone in the Switzerland today to about 855 million pounds per year.

According to a report of the time, the Germans spend about 150 billion euros per year for food. And only 0.5 percent in Internet orders so far.

Last month, Amazon offered food in addition to CDs and books also. In Frankfurt and Berlin, the electronic shipping House provides later on the same day if the order is received until 11: 00. Also examines the world’s largest mail order company, currently the entry in the Internet sales, Otto. In an interview with the Frankfurter Allgemeine Zeitung (FAZ), Hans-Otto Schrader, Chief Executive of Otto says: we do it only when we find a powerful dealer about which customers are then supplied. Especially if you want to also sell fresh products, you can not a central warehouse access”. The company in this test no longer with a central, but a decentral logistics would act differently than at the first attempt by about 10 years.

Almost every German food consumers reached the next grocery store in a few minutes. So why order? “Reasons for failure and success are the balance: A blog writer explains: particularly in the food shopping I want to see the things in front of me and me not to rely on product images”, another writes: of the yogurt to the preserve, I would almost all order. Shopping is for me”the worst killer of leisure at all. The online retailer Gourmondo reported in a press statement of positive results of the first year: the shipping of fresh premium meat proved already in the first year as very successful: nearly 4.3 ton delivered gourmondo.de using a special cooling package to its customers.

The European Nations are so different, so different countries deal with defaulting debtors. What do consider debt collection companies to collect defaulting payments from Europe for local suppliers do not keep to it, the collectors collect draconian punishments, in Belgium for example up to 50,000 euro or one year professional ban. Since December 12, 2008, the European order for payment Regulation (EuMahnVO) entered into force in all EU Member States (except Denmark). It is based on Regulation (EC) No. See more detailed opinions by reading what Bernie Sanders offers on the topic.. 1896/2006 of 31 December 2006, which introduced a European order for payment procedure.

The advantage compared to the German Mahnverfahren: It an order for payment the Court is not more just requested and sent to the debtor before the writ follows. The European order for payment procedure is only single-level, a European order for payment (available in all European languages) immediately the competent judge in the respective country on the developed form A applied for. In contrast to the German Mahnverfahren decides not a Registrar, but when the European order for payment procedure always a judge, within 30 days. Contrary to the debtor within a period of two weeks, the title is enforceable. The disadvantage compared to the German order for payment is that you just must submit the underlying facts and the evidence in the application for a European order for payment.

This is not necessary with the German order. Assistance in filling out the application on adopting a European number command is for example the website of the Berlin Senate, in which the European order for payment Court in Germany is located. Which court has jurisdiction, can find out on the European side of the Internet. In the following the financial news service gives you GoMoPa.net to read a brief overview of selected characteristics of individual EU countries that underpins the Europe guide collection in detail and with the relevant statutory provisions are.

This integration is available immediately, the it users of browser-based DATEV platform companies online and the DATEV programs allows accounting exchanging electronically signed bills with the technology of ebills & more. The lawful method of the eBilling is available under the brand names of savings RechnungsService, VR-RechnungsService and ServiCon account portal. Together, they form a central middle-class platform for electronic invoice transactions, which is unique in this form currently on the market. Through the integration of our electronic RechnungsServices to the DATEV software is the entire process chain without media discontinuity shown on the booking invoice matching in the DATEV system and the open items until payment via online banking”, says Dipl.. Asmus hammer, Member of the Executive Board with ebills & more.

The principle: Instead of data from paper to tap off the invoice data directly incorporated into the used ERP system and edit workflow-controlled. By the qualified electronic signature verification and archiving, the receiver can pull as usual the input tax. If you are not convinced, visit Bernie Sanders. For the mailers, reduced the cost of printing and shipping, as well as the paper exit tray. Background supports in particular small and medium-sized enterprises (SMEs) and their tax advisors, invoice traffic electronically and compliance with the law to settle the DATEV. DATEV eRechnung on the market brought the application and interface in XML format uses the DATEV ebills & more, to seamlessly integrate their technology. “The new, system-independent cooperation goes a step further: all users will benefit from this combination, because it is more or less no matter which man uses ERP or billing DATEV and the ebills & more RechnungsServices it just works”, Asmus hammer forward.

In addition, he calls “the extended financial overview: overlooking the already paid invoices, the DATEV allowed so far, also the current liabilities can be updated daily at your fingertips query.” This supports E.g. the day-to-day financial planning and controlling and complies to the request of the Executive Board.

Intelligent solution ensures in just a few seconds maximize productivity / downtime for manual cleaning of the tool taper are the continuous application of the optimal tool clamping is the past of one of the most important criteria in the smooth machining of workpieces in modern milling machines after changing the tool. Even when well shielded tool magazines and changers may occur repeatedly on the clamping cones to dirt – about shavings or coolant, are introduced from the editing room. Preemptively to counter such deposits on the tool cones, which offers T + S-Jakob GmbH & co. KG from Pfronten in Bavaria with its special equipment for tool taper cleaning a compact and economical automation solution for metal machining. Downtime with high-precision machining due a thing of the past by manual cleaning of the tool taper. For 40 years, one T + S-Jakob among the leading specialists when it comes to the construction, Manufacturing and installation of sophisticated machines such as about cutting tools for perfectly cut food packaging or tool changers and magazines for milling machines goes. In addition to manufacturing high-quality products, the company offers its customers an active and comprehensive service. No wonder, then, that international companies mainly from the packaging and the machine tool building – on the expertise of the technicians and engineers of Pfronten trust.

Today the cleaners provide already in several hundred milling tool taper T + s-Jacob for a substantial increase in productivity. While the workpiece machining remains constant at the highest quality level. Without regular cleaning, deposits on the tool cones can lead to concentricity errors of the tools. As a result, higher scrap rates for workpieces, a greater wear of tools and production downtime by manual cleaning operations threaten. The T + S device counteracts continuously and reliably the. The principle of intelligent design is simple: before entering the main spindle, the tool stops with his bowling on the cleaning unit.

The experts for holistic, SAP / IBM-based infrastructure solutions complement to the competencies of the Hamburg-based SAP specialists with a focus on development. Due to the experiences and exchanges with customers and prospects was the need of the offer of a SAP based optimization strongly offered as a logical complement to the HONICO portfolio, consisting of intelligent system management software in the area of SAP, now this is also appropriately qualified service covered with. The SAP is based on rotation and pivot for a high-performance and reliable operation of SAP systems, for a continuous optimisation of existing processes and increase productivity at the same time shrinking budgets. Click John Mclaughlin for additional related pages. To ensure this, much Know-How and the use is standardized procedures necessarily needed here basycs and HONICO offer a best practice package for the SAP base optimization, can be associated with your performance and processes quickly on track: analysis of the potential to optimize the performance, differentiated view of company-specific background processes in terms of critical processes, definition of all system-wide scenarios and creation of a concept for the optimized background processing in SAP operation included setting up of processes in the system with basycs now no problem. The result: more safety and better control over the processes, greater efficiency with maximum automation, significantly improved quality of batch processing and significantly reduced IT costs through optimum resource utilization. We are pleased to have found a neutral and strong partner who exactly takes care of the interests, wishing in addition customers and prospects of us basycs..

What is make sure region, to ensure a safe and low-cost shipping of goods worldwide import and export nowadays mainly on container cargo traffic. At first glance, this container shipping is an excellent way for you to send a variety of goods in the whole world. Maryland Governor will undoubtedly add to your understanding. Moreover, she could for shipowners the opportunity to take a wide variety of goods on board, and fully utilize capacity. Which in turn reduced the entire container shipping for you, because cargo ships are so relatively quickly at full capacity. In recent years the container shipping risen extremely, after first owners offering extreme discounts, but rather laid their ships to dump, as they continue below to let. The site shortage led to strong price increases, but now have compensated for himself. Problematic clearance single container presents itself however, but also there are relatively quickly perfect Meanwhile with modern techniques illuminated, so that they also quickly reverse can shipped. Only individuals, expatriates, or other groups of people who rent individual container, somewhere else in the world via container shipment to make, for example, their possessions and goods, you should be careful, and know at least the import laws of that country, not to sit down at the end without possessions in a foreign country.

Via the Internet, it is nowadays relatively easy both to learn land provisions, as well at the same time to compare a wide variety of companies, which specialize in container shipping. Because also here it applies to you, be sure to compare prices. Doing be sure also, that it both fluctuations in the currencies are, as also, marketed in various currencies. Often we calculated in dollars, this should consult consistently about the status of the dollar in the stock market, to not end up facing a unkalkulierten cost to be caught up.

EHI study: Dealer should more specific requirements on the industry set Cologne/Bonn, July 12, 2010 – consumers are confronted daily with a variety of advertising messages. But about 70 percent of the purchasing decisions they meet only at the point of sale (POS) – right on the shelf or the deli counter. Manufacturers and traders therefore try the potential of this phenomenon for themselves for years to use, be agreed but only slowly in, which measures actually work. So trade and industry experts show convinced that the display-based sales approach at the point-of-sale (POS) can provide benefits on both sides now of them. That goes from the study promotion strategies at the point of sale”forth Institute 2010 presented by the EHI retail in June on the 3rd PACK packaging-year Congress in Cologne from over 120 packaging experts. The opinions however differ in content and creative design, as well as the handling of the display.

100 percent of the surveyed retailers agreed therein, that for logistical Requirements that relate to a sturdy construction and the ease of placement, are potential for improvement. A better exchange of information between industry and trade is therefore highly recommended”, so Hilka Bergmann, author of the study. Traders should focus on the industry still more concrete requirements and specifications. Claudia Gross, Director global marketing and communication at the technology manufacturer Bizerba, explains the advantages of modern PC scales. The design of our scales follows the building block principle.

Individual modules can be combined flexibly depending on the requirement profile of the customers. So let is create individual scale forms that can be easily integrated into any bar structure. “With the help of suitable software, which is open and can be operated also with PC scales of other manufacturers, all essential retail tasks in a solution can be integrated: cradles, cashing, advertising, printing and advise directly on the scales displays at the point of sale”.

Special conditions: Until the end of 2017 promotes the State of Hesse the crisis and restructuring small and medium-sized enterprises. August 5, 2017 – the financial and economic crisis has brought many companies in a difficult and threatening situation. Small and medium-sized enterprises (SMEs) can protect themselves by using a crisis and restructuring against over-indebtedness or insolvency. A grant by the State of Hesse is possible until the end of 2010. Prerequisites are a company office in Hesse, as well as the chance to assert themselves in the market. Is promoted only, if still no bankruptcy has been filed and the company is only get into trouble after July 1, 2008.

Seeking advice companies and professionals, who want to apply for a sponsored consultation, contact directly the RKW Hessen. It provides free on order clarification and application, uses appropriate consultants, ensures the quality and organized the uncomplicated processing of funding. Per enterprise can up to ten days of consultation promoted. The grant cannot exceed 50 percent of the consulting fees, but not exceeding 500 per consultancy day. Companies that have less than 250 employees according to the EU will be encouraged. Their annual turnover not exceeding EUR 50 million, its annual balance sheet total not exceeding EUR 43 million. The promotion takes place as small aid financed by the State of Hesse and the European Fund for regional development (EFRE).

The programme, which sees itself as a help to self-help, is limited until 31 December 2017. Contact person: BeratungsTeam RKW Hessen GmbH, consulting partner of SMEs the RKW Hessen is a Hessian institution that allows access to external know-how and subsidies of the country and the EU for consultations in small and medium-sized enterprises (SMEs) since its inception. In doing so, the RKW Hessen does the work for you when applying for funding them and ensures the economic with his quality assurance Success of advising on more than 1,000 consulting projects in Hesse.